ONEIDA AIR SYSTEMS XXK10 Cyclone Dust Collector w/ After-filter and Drum: Cyclone & Fabric Filtration Dust Collection System.Specifications: -- 3,800 CFM @ 2.3" SP with 10 HP US Made, Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint finish, weather-proof cyclone and fan blower. -- (3) High Efficient Izumi Axtar Spunbond Media cartridge after-filters for 465 sq. ft. of filter media. Filters 99.9% efficient of 0.2 - 2.0 microns, teflon-like coating to facilitate dust cake release. -- Impeller is 17" Diameter, Single-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy. -- Inlet size 12" round. outlet 12.5" x 10" square dia. -- Includes: Heavy Duty angle iron stand, magnetic starter, and (1) 55 gal. drum kit for waste collection. MADE IN THE USA..

PNEUMAFIL 13.5-460-8 Reverse Air Dust Collector System;Reverse Air Dust Collector with 42,600CFM at 9 to 1 air cloth ratio, 4,738 square feet of filter area. -- 13-1/2' Dia. round baghouse contains (460) bags - 96" long by 5" dia. filter bags in galvanized cages w/reverse jet bag cleaning. -- Reverse Air from 15 HP blower motor which cycles once a minute over filter bags (rotating plenum covers each row of bags once a minute, reversing the normal air flow direction. -- Reverse Air action back flushes the bags and dislodges wood dust particles collected on the filter media which then fall to the bottom of the 60° funnel hopper for removal), bags are changed via walk-in door.. -- Material handling fan with approx. 48" inlet dia with 150 HP floor mounted motor (covered in a shed); 0.25 HP explosion proof motor for manifold drive. -- Rotary Air Lock, gearmotor driven at the bottom of the hopper feeding and shared horizontal screw type auger (if you want it) with gearmotor drive. -- Features: MOTOTRONICS Soft Start for main motor. FIRETEK Spark Detection System (subject to prior sale with adjacent unit). -- Includes: Explosion doors, sprinkler pipe, interior electrical control panel, support frame, safety ladder, railings, and exterior ductwork.Professional dismantling, rigging, transport and installation is available.NOTE: Unit being sold under this record is pictured on the left side on the first two photos. For the smaller diameter unit on the right side (DIXIE AIR) see record "DO-011266".

POWERMATIC Turbo Cone Dust Collector with Twin Canister Filter Kit;Complete with the following features: -- 3 HP 3 PH Material Fan, -- Generates 1,782 CFM. -- Ships from Oregon Coastal region.

REES - C 330-1, ...Dust Collector.3 HP - 3,450 RPM Free-standing unit. -- Approx. 1,200 CFM rating @ 6" of static pressure. -- Single bag collector unit with 55 sq/ft upper filter bag, (1) lower plastic bag for collection. -- 8.2 Cu/ft cap., 7" dia. inlet. -- Equipped with: Optional: Silencer, 55 sq/ft filter bag, 208 Volt starter, and (50) plastic collection bags.

SANDMAN DL7236 Downdraft Sanding Table;The SANDMAN Sanding Table is a dedicated sanding station that doubles as a workbench. -- 72" X 36" Rubberized work surface. -- 1.5 HP T.E.F.C. 220V 1-Phase motor with 10-5/8" LAU blower with sealed ball bearings. -- Industrial casters with 4" wheels, (2) ridged, (2) swivel-lock 2-ways. -- Hinged tilt-up top with gas strut lid support for easy filter servicing. -- Adjustable in height from 34" - 38". -- Grid system top adds versatility. -- 10.4 Cu. Ft. of built in storage area with 1 pull out shelf. -- 18 Months Limited WarrantyNOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

SANDMAN M7236 Downdraft Sanding Table110V 1 HP (M7236) T.E.F.C Motor with 15’ power cord. -- 72" x 36" Rubberized work surface. -- 10-5/8" LAU blower with sealed ball bearings. -- Industrial casters with 5" wheels, (2) ridged and (2) swivel-lock 2-ways. -- Hinged tilt-up top with gas strut lid support for easy filter servicing. -- Grid system top adds versatility. -- (18) Month warranty on parts.NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

SANDMAN M74836 Downdraft Sanding TableGreat sanding table for a singular function such as doing cabinet doors, door fronts, etc. This downdraft table has a 6″ overhang on the front side making it good for sanding while sitting. Machine comes standard with casters, utility tray, & Felt-lined Platforms.Specifications: 48 L x 36" W top surface with heights of 32", 34" $ 36". -- Overhangs of 6" front. 0" back and 4" ends. -- (2) DP20252 Filters and (1) PF4029 pre-filter. -- 1 HP Baldor Motor – Standard Single Phase 110V (13 Amps) -- (18) Month warranty on parts.(Single and 3-Ph 220V available)NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

SANDMAN DL9648 Downdraft Sanding TableThe DL9648 is a dedicated 96" x 48" sanding table that doubles as a workbench. The Sand Pro DL9648 is perfect for sanding large pieces such as doors or as a multi-person sanding station. Specifications: -- Table height 36", table size 96" x 48". -- (2) 1.5 HP TEFC motors with 7,400 CFM @ 1.5 SP and (2) 16" backward inclined fans. -- (6) Extended surface pleated filters each 20" x 25" x 2" deep w/ 1/2" netted polyester filter. Features: -- (4) 110 V duplex receptacles. -- Rubberized mar-proof top. -- Grid system top for jigs and fixtures. -- Hinged top with gas strut lid support for easy access to filters. -- (2) 10" x 32" Shelves. (2) 18" x 24" Storage drawers. -- Stainless steel hanger for air orbital sanders (choose 5" or 6"). Options: -- 3" Swivel casters (Adds 3/4" to machine height). -- Case of (12) replacement filters. -- Single phase available -- 18 Month Limited WarrantyNOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

DONALDSON-DAY 256HPW8 Pulse Jet Dust Collector with walk-in to filter bags. -- General data: 40,500 to 26,000 CFM @ 16.1 to 10.6 ACR (air-to-cloth ratio), 2,544 sq. ft. filter media using (256) 3" x 6" oval x 8' bags, singed polyester filter bags (non-woven micron-rated felt). -- "PowerFlo Cleaning System" allows a higher ACR, "Dura-Life" bag technology allows higher surface loading & pulse cleaning resulting in a two-to-three fold filter life (when changing bags due to pressure drop), Super-sonic nozzles' converging-diverging design produces an intermittent jet of powerful high volume 'induced' air for efficient bag cleaning. GOYER pulse valves. -- Fan/Motor: Two New York Blower PLR, Size 33, class IV air handling fans belt driven by (2) 75 HP 365T, TEFC 1775 RPM motors. Fan inlets are approx 37" dia.. Upward blast discharge. -- Includes: Lower Hopper, Powered Horizontal Auger/Rotary Air Lock with belt driven motor. Explosion Vents, side access filter bags, caged access ladder and , steel support structure. Pipe adaptor for blower to collector line and square to round adaptor on filter inlet. Fan exhaust stack. No return air was installed on prior application -- NOTES: One set of used but laundered filter bags (stored in boxes) are included. Explosion doors will have to be replaced. -- Shell dimensions approx 192" wide x 112" deep x 274" top to bottom of hopper (332" high (overall height) . Weight about 15,000 Lbs.

TORIT-DONALDSON ADMC AD8 DRYFLO Cartridge Dust Collector. A Mist collector designed for long-lasting high collection efficiency capture of coolant and machining oil mists in metalworking applications. Even smaller amounts of dust can be filtered in the dirty air stream. -- DRYFLO is a proprietary cartridge which outperforms electrostatic precipitators and mist collectors utilizing standard HVAC envelope and cassette filters. Filter unit features a unique air-side filter retention system allowing for quick filter changes with minimal worker contact with collected oil. -- Also feature three-stage Filtration via a.) prefilter, b.) wrap allowing, c.) the filter cartridge to drain and coalesce smaller coolant mist droplets in to larger droplets. Plus optional fourth stage HEPA filters available for applications where smoke exists or additional efficiency of discharge air is required. -- Overall data: Capable of 17,600 CFM; (8) Filter Cartridges, 1,760 sq. ft. of filter area, -- Complete with: Ground mounted fan powered by a 40 HP motor, belt-driven. Fan includes a variable volume inlet. In prior application clean air was not retruned to building. -- Blower currently setup for approx. 15,000 CFM with 40 HP, Baldor Super-E, 324T frame, 1.780 RPM motor. -- Enclosure dimensions: 133" long, 68" deep, 160" high. Filter weight is 7,300 lbs.

TORIT 460-IRD-20 Dust CollectorAn easy and economical solution for a wide range of wood dust collection applications. Down flow air pattern allows airflow and gravity to move filtered dust to collection receptacles for longer bag filter life and reduced pressure dropSpecifications: -- 20 HP direct drive, floor mounted blower. -- Fan inlet 17". -- 7,000 CFM. -- Set of filter bags -- .Steel elbow from fan to collector. Motor starter NOT included.

TORIT PCO2-4 Baghouse Dust Collector (Cartridge)Specifications: -- Top-mounted 7.5 HP blower with 1,750 CFM. -- (4) Cartridge filters with controller for high and low set pressure to activate the pulse jet cleaning. -- Dust collected s single, heavy-duty barrel. -- Inlet size 14". -- Return air damper / muffler. -- Includes: Set of New cartridge filters.(Additional ducting available)

DONALDSON TORIT ECB 1 Environmental Control Module Rated at 4,500 CFM @ 3.3:1 Air-To-Cloth ratio with a 5 HP blower / motor. -- Cloth area 1,356 Sq. Ft. from (6) cartridge filters (used) with louvered doors. -- Unit includes: Reverse pulse jet cleaning, motor starter, pulse control timer board and pressure gage. -- (6) Round Cartridge Filters - fire retardant. -- Motor starter and disconnect. -- Great for removing fine airborne dust from multiple sources. Recirculates clean air, eliminating the need for costly make-up air and requires no ductwork. -- Modular, compact design permits proper sizing for each application. -- Installation , Operation, Maintenance Manuals included

DONALDSON TORIT ECB 1 Environmental Control Module Rated at 4,500 CFM @ 3.3:1 Air-To-Cloth ratio with a 5 HP blower / motor. -- Cloth area 1,356 Sq. Ft. from (6) cartridge filters (used) with louvered doors. -- Unit includes: Reverse pulse jet cleaning, motor starter, pulse control timer board and pressure gage. -- (6) Round Cartridge Filters - fire retardant. -- Motor starter and disconnect. -- Great for removing fine airborne dust from multiple sources. Recirculates clean air, eliminating the need for costly make-up air and requires no ductwork. -- Modular, compact design permits proper sizing for each application.

UAS FJH8-2 DUST HOG Cartridge Dust Collector with Rotary Air Lock. Approx. 3,500 CFM Cartridge Filter System, complete with capacity of 1,808 sq. ft. of filter area composed of (8) cylindrical cartridges (226 sq. ft. cloth area per cartridge), CFM based on a target 2:1 Air to Cloth Ratio.. -- Automatic Pulse Clean System with differential pressure gauge and sequencing timer board in enclosure. Continuous pulse jet cleaning via compressed air, (1) pulse valve per (2) cartridges. -- Includes: Bottom hopper ROTOLOK 8" Rotary Air Lock (not mounted and to be adapted). steel support legs. -- Features: Heavy Duty steel legs which can be extended for position a storage container below RAL's. -- Comes with: CINCINNATI 150 BI t0 HP side mounted direct drive fan motor which pulls dust laden air thru the collector (clean air side); Baghouse has dusty air inlet at the top of hopper and clean air discharge from fan. -- Price includes dismantling and loading on flatbed truck.

WESTERN PNEUMATICS - WP12, ...Rotary Air Lock with: "10 x 16" Discharge opening. -- DODGE 5 HP Gear motor drive. -- Flange mount for installation.

AAF PULSE-PAK 21-3H Pulse-Jet Cartridge Dust Collector. (3H) is three-high filter elements. (21) is the total number of Panel Pak V's.The Panel Pak filter element has two flat panels of pleated media in a Vee-Configuration allowing installation and change-out with minimum time and effort. Each cartridge has its own gasket ensuring a positive, air tight seal. -- Consists of two modules: one containing (9) 3x3 filters and the second contains (12) 4x3 filter cartridges, for a total of (21) cartridges. -- Housing dimensions: 191.75" High (with 48" hopper clearance), 104.25" Wide, 94.25" Depth, and Weighs about 6,400 Lbs. -- Air consumption about 6 cubic feet/hr. at 90 PSI of clean dried air. -- Fan and Airlock available at extra cost. please inquire.

ACT 4-16 Cartridge Dust Collector Cartridge style downward flow dust collector rated at 8,000 CFM. Specifications: -- 20 HP Direct drive, top mounter blower rated at 8,000 CFM @ 10" w.c. -- (16) Nano Elite, flame-retardant, Nano-Fiber merv 15, cartridge filters with up to 4,064 sq. ft. of filter media that are 99.9% efficient. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with latch kit, quick-lock easy-access filter doors. -- Magnetic motor starter.Equipped with: -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (8) pulse valves. Goyen diaphragm and solenoid valves -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. Options: -- Fan outlet damper. -- Fan outlet silencer. -- All in one - Starter / disconnect / timer board / pressure gauge Other models available, please check with the Product Manager10 year workmanship and materials warranty -- Made in the USA

ACT 3-6 Cartridge Dust Collector Cartridge style downward flow dust collector rated at 4,000 CFM. Specifications: -- Blower, 10 HP rated at 4,000 CFM @ 10" w.c. -- Holds (6) Nano Elite, merv 15, cartridge filters with up to 1,524 sq. ft. of filter media that are 99.9% efficient. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with latch kit, quick-lock easy-access filter doors. -- Magnetic motor starter panel. -- (6) Filter Upgrade to ACT Nano-Elite, flame-retardant, Nano-Fiber media with industry best Merv 15 efficiencyEquipped with: -- Pulse control timer board with built-in digital pressure gauge. -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (3) pulse valves. Goyen solenoids and diaphragm. -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. -- 12" in-letOptions: -- Fan outlet silencer. 10 year manufactures materials and craftsmanship warranty . Made in the USA

ACT 3-12 Cartridge Dust Collector Cartridge style downflow dust collector rated at 5,800 CFM. Heavy-duty with 7 and 10 gauge construction. Specifications: -- Blower, 15 HP rated at 5,800 CFM. -- (12) Nano Elite, MERV 15, cartridge filters with 3,046 sq. ft. of filter media that are 99.9% efficient. -- Reverse pulse filter cleaning system. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with quick-lock easy-access filter doors. -- Magnetic motor starter and disconnect. -- 16" inletEquipped with: -- TCBI 15 HP Blower with direct drive, top mount. -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (6) pulse valves. Goyen solenoids and diaphragm. -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. -- Drum Lid Latch Ring -- 10 year workmanship and materials warranty -- Made in the USA